AUTUMN BROWN HANDCUT 22MM CALIBRATED PAVING MIXED SIZES PROJECT PACK
19sqm once laid and jointed 10-15mm
*small additional charge to some delivery areas may apply, please see our chart
- Material – Sandstone
- Thickness – 22mm Calibrated (+/- 1-2MM Tolerance)
- Colour – Tones of Brown
- Sizes – 600×900, 600×600, 600×290, 290×290 (+/1 3-5mm Tolerance)
- Finish – Riven surface handcut edges
Hand cut Sandstone is A Beautiful Natural range of outdoor paving, coming straight from the Quarries of India.
Our stone is Calibrated to a depth of 22mm which means all flags will be approximately the same thickness. This leaves a natural Riven finish to the top and the sides.
As with all natural stone, each piece is unique and comes with its own blends of colours and markings. Making no two pieces the same, this is the beauty of a natural stone. Please use our pictures as a reference only to the colours and texture
PAVING FINISHES EXPLAINED
Riven: Textured, slightly uneven.
Shotblast: Flat surface with a dimpled texture.
Sawn & Honed: Flat smooth, polished face, machine cut
Flamed: Surface of the slab has been flamed with a torch to give a light textured finish (Granite)
Sawn Edge: All sides of the paving machine cut
Calibrated: Paving is cut to the same depth give or take 1 to 2mm tolerance (easy lay)
Handcut: Paving is cut by hand, will be different depths all over(within 5-10mm), sides and surface will be Riven.
WOULD YOU LIKE MORE INFORMATION AND HELP:01329 238150
Please do not hesitate to Contact our friendly sales team today.
The pictures provided give an indication of the variety of colours, they are for illustration purposes only. These may vary due to the nature of natural paving.
Delivery – Whilst we do everything to make sure that the paving is packed well, due to the nature of the material we cannot guarantee in transit there will be no damages, we ask you take this into consideration as we are unable to replace small quantities of paving. Please allow 1-2 slabs tolerance.
Recommendations – it is advised before laying to use a product called SBR on the underside of the slabs, after installation it is recommend to wash the paving down, joint the paving using a jointing compound and once dry seal the paving with a breathable sealer. Do not use any acid-based product for cleaning on natural stone.
Please Note – The stones are packed in the quarries in India, they do not go through a cleaning or pre selection process, they will be dusty and have white scuff marks and natural imperfections, There isn’t a consistency to the riven surface and some will be more riven than other, we have tried to illustrate in our picture as much as possible, buy using before, after, dry and wet pictures. Due to the stones being natural this is all to be expected. The paving will look at it’s best once it has been cleaned and sealed.
WE ADVISE TO ALLOW A MINIMUM OF 10% EXTRA ON ALL ORDERS FOR CUTS, BREAKAGES AND ANY STONES THAT DUE TO NATURAL MARKING AND VARIATIONS YOU MAY NOT WISH TO USE
Please see our business sellers information on the bottom left of the page or in sellers legal information if your using a smart phone or tablet for our terms and conditions.