BLACK LIMESTONE MIXED SIZE 22MM CALIBRATED PAVING WITH SAWN EDGES PAVING 40sqm
- Material – Limestone
- Thickness – 22mm Calibrated (-/+ 2mm Tolerance)
- Colour – Black
- Sizes – 16 x 600×900,16 x 600×600, 16 x 600×290,12 x 290×290 (-/+ 3-5mm Tolerance)
- Finish – Textured surface, Sawn edges
Limestone is a great alternative to Sandstone, very hard wearing and durable it is ideal for outdoor paving and driveways.
Slightly more of a texture finished to the more riven Sandstone, yet still giving a natural rustic look. Black limestone will be tones of dark grey when dry and black when wet. We highly recommend you seal the Black limestone to get the best look from the paving.
As with all natural stone, each piece is unique and comes with its own blends of colours and markings. Making no two pieces the same, this is the beauty of a natural stone. Please use our pictures as a reference only to the colours and texture, we have wet the paving to give you an idea of the look once sealed with a black limetsone sealer.
PAVING FINISHES EXPLAINED
Riven: Textured, Riven, slightly uneven.
Shotblast: Flat surface with a dimpled texture.
Sawn & Honed: Flat smooth, polished face, machine cut
Flamed: Surface of the slab has been flamed with a torch to give a light textured finish (Granite)
Sawn Edge: All sides of the paving machine cut
Calibrated: Paving is cut to the same depth give or take 1 to 2mm tolerance (easy lay)
Handcut: Paving is cut by hand, will be different depths all over(within 5-10mm), sides and surface will be Riven.
The pictures provided give an indication of the variety of colours, they are for illustration purposes only. These may vary due to the nature of natural paving.
Delivery – Whilst we do everything to make sure that the paving is packed well, due to the nature of the material we cannot guarantee in transit there will be no damages, we ask you take this into consideration as we are unable to replace small quantities of paving. Please allow 1-2 slabs tolerance.
Recommendations – it is advised before laying to use a product called SBR on the underside of the slabs, after installation it is recommend to wash the paving down, joint the paving using a jointing compound and once dry seal the paving with a breathable limestone sealer. Do not use any acid-based product for cleaning on natural stone.
Please Note – The stones are packed in the quarries in India, they do not go through a cleaning or pre selection process, they will be dusty and have white scuff marks and natural imperfections, some will be more textured/riven than others, we have tried to illustrate in our picture as much as possible. Due to the stones being natural this is all to be expected. The paving will look at it’s best once it has been cleaned and sealed.
WE ADVISE TO ALLOW A MINIMUM OF 10% EXTRA ON ALL ORDERS FOR CUTS, BREAKAGES AND ANY STONES THAT DUE TO NATURAL MARKING AND VARIATIONS YOU MAY NOT WISH TO USE
Please see our business sellers information on the bottom left of the page or in sellers legal information if your using a smart phone or tablet for our terms and conditions.